Printers: How to add printers and connect a buzzer
Table of Contents
Printers print the receipts for your guests and the production tickets for your kitchen and bar. In this article you add a printer in the Backoffice, change or delete a printer, and connect a buzzer that beeps every time a new order is printed.
What do you need to know?
You manage your printers in the Backoffice under General > Printers. The POS finds each printer through its network address, and the driver tells it how to print. When you add or change a printer, you see these settings:
| What you see | What it means | What to do |
|---|---|---|
| Name | The name of the printer in the Backoffice, for example Kitchen printer. | Enter a name you recognise easily. |
| Logical name | The name the system uses for the printer. | Enter it in capital letters without spaces, for example KITCHENPRINTER. |
| Driver | The printer model and the way it prints. | Choose the driver of your printer. For a buzzer, see Part 3. |
| Network address | The IP address of the printer in your network. | Enter the IP address followed by :9100, for example 192.168.0.11:9100. |
| Ticket printer | The printer prints receipts. | Tick it for the printer at your till. |
| Is coop printer, Connected customer display, Print move ticket, Only generate ESCPOS code | Settings for special setups. | Leave them unticked, unless the service desk tells you otherwise. |
| Alternative printer in case of error | A second printer that takes over if this printer is not available. | Optional. Choose another printer. |
| Duplicate printer | A printer that prints a copy of every ticket. | Optional. Choose another printer. |
| Logo filename | The file name of a logo for the printout. | Leave it empty, unless the service desk has set up a logo for you. |
Part 1: Add a printer
Follow these steps to add a new printer, for example for a new terrace bar.
1. Open General
In the Backoffice menu, click General.

General in the left menu of the Backoffice.
2. Go to Printers
In the submenu, click Printers.

Printers in the General submenu.
3. Click + Add printer
You now see the overview of your printers with their logical name, driver and network address. Click + Add printer in the top right corner. A new window opens.

The overview of your printers with the + Add printer button.
4. Enter a name
Enter a Name for the printer.

The Name field of the new printer.
5. Enter the logical name
Enter the Logical name in capital letters and without spaces, for example PRINTERTERRACE.

The Logical name field.
6. Select the driver
Open the Driver drop-down menu and select the driver of your printer.

The Driver drop-down menu.
7. Enter the network address
Enter the IP address of the printer in Network address, followed by :9100. For example: 192.168.0.11:9100.

The Network address field.
8. Choose what the printer does
Tick one or more options. For the printer at your till, always tick Ticket printer. Leave the other options unticked, unless the service desk tells you otherwise.

Ticket printer is ticked for a printer that prints receipts.
9. Save the printer
Click Save in the bottom right corner. Use Save and add new if you want to add another printer straight away.

The Save button at the bottom right of the window.
Part 2: Edit or delete a printer
Open General > Printers first, as shown in Part 1, steps 1 and 2.
1. Edit a printer
Click the pencil icon next to the printer you want to change. Change the settings and click Save.

The pencil icon opens the settings of the printer.
2. Delete a printer
Click the bin icon next to the printer you want to delete.

The bin icon next to a printer.
3. Confirm the deletion
Click Delete to confirm.

Confirm with Delete.
Part 3: Connect a buzzer
A buzzer, also called a zoomer, is a small device that beeps every time a new order is printed. It helps staff notice new orders on a kitchen or bar printer in a busy or noisy area. After the buzzer is plugged into the printer, you choose a driver that sends a signal to it.

An external buzzer. It connects to the RJ-11 port of the printer.
1. Edit the printer
Go to General > Printers and click the pencil icon next to the printer the buzzer is connected to.

The pencil icon of the printer with the buzzer.
2. Open the Driver drop-down menu
In the settings of the printer, open the Driver drop-down menu.

The Driver drop-down menu of the printer.
3. Select EPSON TMT-88 GROOT
Select EPSON TMT-88 GROOT. With this driver, the printer sends a signal to the buzzer with every ticket.

Select EPSON TMT-88 GROOT for a printer with a buzzer.
| Driver | What happens | When to use it |
|---|---|---|
| EPSON TMT-88 GROOT | The printer sends a signal with every ticket. A connected buzzer beeps. A connected cash drawer opens. | For a kitchen or bar printer with a buzzer. |
| EPSON TMT-88 GROOT zonder beeper | The printer sends no signal. "Zonder beeper" is Dutch for "without beeper". | For a printer without a buzzer, or for a kitchen printer that is also your receipt printer. This way the cash drawer does not open with every production ticket. |
4. Save the printer
Click Save in the bottom right corner.

The Save button of the printer.
Save and send your changes
Changes to your printers only reach your POS after you send them. Click Save in the bottom right corner. Then send your changes to your POS via General > General > Send. Read more in Sending changes from Backoffice to POS.

General in the General submenu.

The Send button sends your changes to the POS.
Good to know
- Ask before you change. Printers are set up during installation. If a printer stops printing after a change, contact the DISH POS service desk.
- Use the right address format. Enter the IP address followed by :9100, for example 192.168.0.11:9100.
- Keep logical names simple. Use capital letters without spaces, for example BARPRINTER.
- One port, one device. A printer can have a cash drawer or a buzzer, not both.
- "Zonder beeper" means without buzzer. Choose this driver when a printer should not send a signal, for example when it also opens your cash drawer.
- Send your changes. New or changed printers only work on your POS after you send the changes.
- Check the result. After you send the changes, place a test order. Check that the ticket prints on the right printer and that the buzzer beeps.